Freeze Skin Tag Remover 38mL

Directions

1. Place a protective plaster around the skin tag to be treated.
2. Place a foam tip holder in the opening at the top of the applicator cap. Press the holder gently into the opening. Hold the dispenser upside down with the holder and foam tip pointing towards the floor.
3. Press the bottom of the dispenser firmly with the thumb 4-times to saturate the foam-tip. Wait 10 seconds to let foam-tip reach temperature,
4. Gently hold the foam tip against the skin tag for 40 seconds.
5. Remove the protective plaster surrounding the skin tag directly after the treatment.
6. Carefully remove the foam-tip from the applicator cap opening by pulling it out by its holder.
Freezes Skin Tags

Ingredients

Dimethyl ether (DME)

Warnings

For external use only. Do not use on individuals with diabetes. Do not use on children under 18 years of age. Keep out of reach of children. Consult a medical professional, if pregnant or breastfeeding. Do not use on skin tags larger than 4 mm. Read instructions for use carefully. Store in a cool and dry area. Do not exceed 25°C.
Do not remove the permanently fixed applicator cap from the dispenser.